Original JUP00001 KUS Oil Pressure Sensor VDO Part Number 360-081-029-010C and 360-081-029-010K M14×1.5 Metric Thread Dual

JUP00001 Original kUS Oil Pressure Sensor VDO Part Number 360-081-029-010C and 360-081-029-010K
 

Range 0-10 BAR, mounting thread M10x1.0, VDO connector type A, 10~184 ohm output, no alarm, single terminal

It combines the advantages of excellent anti-vibrationperformance, long service life, simple assembly process, stable quality, wide range of operating temperature, etc.
It is largely applied to many fields, such as the engine pipe of vehicles and ships, water processing projects, inspection and control of industrial processes, hydraulic and pneumatic control projects, etc.
Protection rank: IP66

Product Specifications

• Model: Original Genuine KUS JUP00001 Dual Terminal Coolant Temperature Sender (With 98℃ Overheat Alarm, M14×1.5 Thread)
• Alarm Trigger Temp: 98°C (±3°C tolerance)
• Power Supply: DC6 ~ 24V Universal 12V/24V Generator Battery
• Mount Thread: M14×1.5 Metric Male Thread
• Terminal: Dual 6.3mm Flat Spade Terminals (Separate Temp Signal + Alarm Output)
• Housing: Solid Brass IP67 Fully Sealed Anti-Oil & Waterproof
• Warranty: 12 Months Genuine KUS Factory Warranty

Core Electrical & Mechanical Specifications

1. Power Supply: DC 6V ~ 24V universal for 12V / 24V generator systems
2. Alarm Switch Rated Power: 1.2W ~ 3W DC
3. Temperature Working Range: -25℃ ~ +120℃ (max continuous 120℃ for 1 hour)
4. Response Time: ≥3 minutes stable reading after power on
5. Housing Material: Solid brass anti-rust & anti-coolant corrosion
6. Vibration Standard: Industrial genset anti-shock certification
7. Temperature Accuracy: ±3℃ full scale
8. Terminal Size: 6.3mm standard flat spade connector

Wide Application Range

1. Full-function diesel generator OEM supporting: simultaneous coolant temperature display + 98℃ overheat automatic shutdown safety protection for M14 metric thread engine blocks
2. Old M14×1.5 dual-terminal alarm temp sender failure replacement: no temp reading, unstable gauge value, coolant leakage, missing high-temp fault alarm
3. Power rental & maintenance shop stock for standard gensets, marine engines, construction machinery with M14 cooling water port and safety auto-stop requirement
4. Retrofit complete safety monitoring system for silent generator sets, add 98℃ overheat auto stop protection

Common Equipment Failures Solved

• Cheap aftermarket dual temp sender resistance drift, water temp gauge value jumps randomly, alarm switch fails to trigger at 98℃
• Sensor brass housing corrosion & coolant leakage, engine overheat risk leading to cylinder head damage
• Incompatible third-party sender, analog temp gauge no display or serious reading deviation, DSE controller cannot detect high-temp fault signal
• Original KUS JUP00001 damaged, need genuine M14×1.5 dual-terminal alarm temp sender direct replacement without wiring modification
• Generator engine block with M14×1.5 coolant port, requires both temperature display and 98℃ overheat automatic shutdown safety protection, single-terminal non-alarm sender cannot meet demand