Original Genuine Mebay DC60D Generator Controller Panel LCD Display Engine Control Module

Wide Application Range

Medium silent single diesel generator control cabinet, construction machinery single engine unit, light marine auxiliary genset, off-grid medium independent power supply equipment, generator repair shops and medium power distribution engineering projects that only need standalone genset automatic start-stop function without electronic injection ECU data reading, ATS automatic switching and remote centralized cloud monitoring requirements.

Product Specifications

• Brand: Mebay 
• Model: DC60D 
• Core Function: Base standalone genset auto start-stop controller, substitute DeepSea DSE6110 base model, only USB local debugging (No RS485 Modbus, No CAN J1939 ECU bus, No mains AMF sampling)
• DC Power Supply: DC8V~36V universal wide voltage for 12V/24V generator batteries
• AC Sampling: Single generator three-phase voltage and current monitoring, auto 50/60Hz frequency identification
• Communication Interfaces: Front USB Type-B local debug port (No CAN J1939 ECU bus, No rear RS485 Modbus remote port)
• Display: 4.3-inch colorful TFT multi-language LCD dashboard
• Panel Cutout Size: 186 × 142 mm, overall dimension 210 × 160 × 50 mm
• Weight: 0.9kg
• Front Panel Protection Grade: IP54 dustproof & waterproof with silicone sealing gasket
• Operating Temperature: -20℃ ~ +65℃
• Warranty: 12 months genuine factory warranty
• Certifications: CE, ISO9001, EMC EN55032 IEC61000-4

Common Equipment Failures Solved

• Generator cannot auto start after receiving remote signal: Remote dry contact wiring loose, auto start delay parameter misconfigured
• Laptop cannot connect controller for parameter modification: Use SG72A USB communication adapter, install official Mebay configuration software
• Onboard relay burned when driving glow plug: Onboard contact capacity limited to 5A, install external Hongfa HAT700BI 70A heavy relay for current amplification
• Need mobile APP remote cloud monitoring: DC60D MKII without RS485 port, upgrade to DC60DR MKII model with isolated RS485 Modbus communication
• No engine ECU data display reminder: DC60D MKII model has no CAN J1939 bus, select DC72DR MK2 if electronic injection ECU reading function is required
• Frequent low oil pressure / high water temperature alarm: SGPT110 pressure/temperature sensor damaged or threshold parameter misadjusted
• Old DSE6110 or DC60DR MKII panel upgrade replacement: DC60D MKII fully compatible with original installation and wiring, direct downgrade replacement for cost control