Original DATAKOM DKG105 AMF Generator Controller Digital LED Display Mains Failure Auto Start Stop Multi-Protection Diesel Gas Genset Control Module

Product Specifications

• Model: Genuine DATAKOM DKG105 AMF Generator Controller
• Power Supply: DC 9~33V Wide Voltage (12V/24V Universal)
• Display: 3-Digit Red LED Multi-Parameter Cyclic Display
• Core Functions: Mains Failure Auto Start/Stop, ATS Load Transfer, Multi-Fault Protection, Hour Recording, Digital Parameter Setting
• I/O Rated Current: Each Relay Channel Max 10A
• Mounting: Standard 72×72mm Embedded Panel Installation
• Operating Temperature: -20℃ ~ +70℃
• Net Weight: 0.2KG
• Package: Carton Packaging
• Warranty: 6 Months Factory Warranty
•  

Wide Application Range

1. 5-150kVA single standby diesel/gas generator ATS automatic control cabinet
2. Residential, fire emergency, shopping mall small key load backup power system
3. Telecom base station, remote unattended off-grid agricultural irrigation power station
4. Construction site temporary mobile generator, rental genset automation retrofitting
5. Small marine auxiliary generator, water pump unit automatic control upgrade

Key Product Features

1. Standard 72×72mm Universal Panel Size, Plug-In Quick Replacement
   Industry general square mounting dimension, pluggable green terminal block, no complicated wiring modification, can directly replace old DKG series, HGM series, DSE compact controllers, greatly shortening on-site maintenance downtime.
    
2. Complete AMF Mains Failure Automatic Transfer Function
   Real-time three-phase mains abnormal detection, fully automatic unattended operation: mains loss → preheat → multi-times cranking startup → load switch to genset; mains restore → load switch back to grid → cooling delay shutdown, perfectly matched with ATS dual power switch to realize uninterrupted power supply.
    
3. Full-Range Engine Safety Protection With Independent Fault LED Indicator
   Each fault corresponds to an independent red LED alarm light, fault state locked after shutdown, maintenance personnel can quickly locate abnormal causes; all voltage, frequency, temperature, pressure protection thresholds are digitally adjustable to adapt to various types of generator sets.
    
4. 20 Groups Of Programmable Parameters + Power-Off Data Permanent Storage
   All startup timing, protection limit, preheating time, cranking retry times can be freely set via panel buttons; parameter data stored in non-volatile chip, will not be lost after long-term power failure, no need to reset after equipment maintenance power off.
    
5. Wide DC Voltage Adaptation + Industrial Anti-Interference Design
   9-33V wide power supply range, no misoperation caused by battery voltage drop during engine cranking; built-in surge and EMI suppression circuit, stable continuous operation in high-temperature, dusty, humid power distribution room and engine room harsh environments.
    
6. Dual Fuel Compatibility For Diesel & Gas Generators
   Supports both diesel fuel stop output and gas valve cut-off control logic, suitable for gasoline, diesel, natural gas generator sets, wide application range, high spare part versatility for domestic and export equipment.
    

Common Equipment Failures Solved

• Old manual generator needs on-duty personnel for startup and shutdown, high labor cost and easy to miss power failure emergency response
• Controller parameter disorder, single protection missing leading to engine high-temperature scuffing, low oil pressure bearing burnout overhaul failure
• Non-standard size controller requires cabinet drilling modification, high renovation cost and long construction period
• Ordinary controller cannot store running hours, unable to formulate standardized regular maintenance plans leading to accelerated engine aging
• Imported original controller has long delivery cycle and high purchase cost, genuine DKG105 realizes cost-effective emergency maintenance replacement