Original DC10G Mebay Generator Engine Multifunction Controller Control Module

Original DC10G Mebay Generator Engine Multifunction Controller Manual Start Stop Control Module

 

DC10K and DC10G are controllers for manual engine start and stop. The 4-digit LED digital tube displays the frequency, voltage, battery voltage, and accumulated working time of the generator set. It has a variety of parking protection and alarm indication functions, and can conveniently monitor the working status of the generator set.

 

The controller can be connected to the computer through a data cable, and the controller parameters can be set through the software to facilitate matching of generator sets with more specifications.

 

Specifications

·Operating Voltage：DC8V to 33V continuous power supply

 

Machine power consumption

·Standby: 24V: MAX 1W

·Operation: 24V: MAX 2W

·AC voltage input：One phase two wires 15VAC-300VAC 50/60Hz

·Engine speed signal range：300-10000Hz

·Maximum cumulative running time：9999 hours (minimum storage time 6 minutes)

·fuel output：Max 16Amp DC+VE supply voltage output

·Motor output：Max 10Amp DC+VE supply voltage output

·Alarm Output：Max 16Amp DC+VE supply voltage output

·Excitation output：Maximum 80mA DC+VE supply voltage output

·Switch input：Effective when connected to the negative pole of the battery

 

Insulation level

When AC2.2kV voltage is applied between the AC high-voltage terminal and the low-voltage terminal, the leakage current shall not exceed 3mA within 1 minute.

·working conditions：-30-75℃

·storage conditions：-40-85℃

·Dimensions：78mm×78mm×72mm

·Hole Size：67mm×67mm

·weight：0.28Kg