Wespc Technologies
Original DSE720 Deep Sea 720 AMF Generator Controller Auto Start Control Panel
Original DSE720 Deep Sea 720 AMF Generator Controller Auto Start Control Panel
Precio habitual
$170.00 USD
Precio habitual
$0.00 USD
Precio de oferta
$170.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Original Genuine DSE720 Deep‑Sea Obsolete AMF Generator Controller Auto Mains Failure Control Module
The DSE710 is an Automatic Start Control Module suitable for a wide variety of single diesel or gas genset applications. Monitoring an advanced list of engine parameters, the DSE710 will automatically shut down the engine, or indicate a warning, on detection of a fault condition, indicating the fault on the module’s front panel LCD display or LED. The module can be easily configured using the DSE810 interface and PC. Front panel editing is also available.
The module can be controlled from a PC that is located up to a maximum distance of 100 meters away. The DSE720 is an Automatic Mains Failure Control Module incorporating all the features of the DSE710 plus the ability to monitor the mains (utility) supply, automatically controlling the switch-over to generator when the mains (utility) power fails.
SPECIFICATION
DC SUPPLY CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT: 180 mA at 12 V. 190 mA at 24 V
MAXIMUM STANDBY CURRENT: 145 mA at 12 V. 150 mA at 24 V
OUTPUTS AUXILIARY: Solid state 2.4 A DC at supply voltage
FUEL/START: Solid state 3.4 A DC at supply voltage
GENERATOR C.T.: 5 A secondary 0.5 VA
GENERATOR INPUT RANGE: 35 V(L-N) to 333 V AC(L-N) absolute maximum 50 Hz - 60 Hz (min 15 V AC)
MAINS (UTILITY) SENSING INPUT RANGE (DSE720 only): 35 V(L-N) to 333 V AC (L-N) 50 Hz - 60 Hz (min 15 V AC)
DIMENSIONS OVERALL: 209 mm x 146 mm x 30.3 mm 8.2” x 5.7” x 1.2”
PANEL CUT-OUT: 182 mm x 137 mm 7.2” x 5.4”
MAXIMUM PANEL THICKNESS: 8 mm 0.3”
The DSE710 is an Automatic Start Control Module suitable for a wide variety of single diesel or gas genset applications. Monitoring an advanced list of engine parameters, the DSE710 will automatically shut down the engine, or indicate a warning, on detection of a fault condition, indicating the fault on the module’s front panel LCD display or LED. The module can be easily configured using the DSE810 interface and PC. Front panel editing is also available.
The module can be controlled from a PC that is located up to a maximum distance of 100 meters away. The DSE720 is an Automatic Mains Failure Control Module incorporating all the features of the DSE710 plus the ability to monitor the mains (utility) supply, automatically controlling the switch-over to generator when the mains (utility) power fails.
SPECIFICATION
DC SUPPLY CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT: 180 mA at 12 V. 190 mA at 24 V
MAXIMUM STANDBY CURRENT: 145 mA at 12 V. 150 mA at 24 V
OUTPUTS AUXILIARY: Solid state 2.4 A DC at supply voltage
FUEL/START: Solid state 3.4 A DC at supply voltage
GENERATOR C.T.: 5 A secondary 0.5 VA
GENERATOR INPUT RANGE: 35 V(L-N) to 333 V AC(L-N) absolute maximum 50 Hz - 60 Hz (min 15 V AC)
MAINS (UTILITY) SENSING INPUT RANGE (DSE720 only): 35 V(L-N) to 333 V AC (L-N) 50 Hz - 60 Hz (min 15 V AC)
DIMENSIONS OVERALL: 209 mm x 146 mm x 30.3 mm 8.2” x 5.7” x 1.2”
PANEL CUT-OUT: 182 mm x 137 mm 7.2” x 5.4”
MAXIMUM PANEL THICKNESS: 8 mm 0.3”
Compartir
