Wespc Technologies
Original HGM1790N Genuine Smartgen Manual Remote Start Generator Pump Controller Module
Original HGM1790N Genuine Smartgen Manual Remote Start Generator Pump Controller Module
Precio habitual
$105.00 USD
Precio habitual
$180.00 USD
Precio de oferta
$105.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Original Genuine Smartgen HGM1790N Single Genset Auto Start Controller LCD Backlight Display USB PC Debug DC8-35V Wide Voltage 12/24V Diesel Generator Monitor Protection Module
Overview
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).
Overview
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).
Product Specifications
- Brand: Original Smartgen
- Model: HGM1790N
- Display: Backlight graphical LCD, English interface
- DC Power Supply: DC 8V ~ 35V, standby ≤0.5W, working ≤1.2W
- AC Sampling: Single-phase AC15~360V 50/60Hz
- Relay Output Capacity: Fixed output 1A DC28V; Aux programmable output 1A DC28V
- Debug Interface: USB Type-B (PC parameter adjustment)
- Panel Cutout Size: 78mm × 66mm
- Overall Dimension: 10*9*8 cm
- Net Weight: 0.2kg
- Operating Temperature: -25℃ ~ +70℃
- Protection Class: IP55 (with waterproof sealing rubber gasket)
- Warranty: 12 months genuine factory warranty
Wide Application Range
Small silent diesel generators, portable gasoline generators, agricultural irrigation water pump units, construction machinery single engine control, off-grid backup power equipment, small communication base station standby power supply, marine single generator auxiliary control.
Common Equipment Failures Solved
- Generator cannot auto start: Check remote start input signal, preheat delay parameter, crank output wiring
- Controller no display: Battery voltage out of 8~35V range, power wiring loose, fuse blown
- Frequent high water temp / low oil pressure alarm: Sensor damage, sensor wiring open circuit, parameter threshold setting error
- Crank motor keeps running without starting: Crank disconnect condition setting error, fuel output failure
- Need to drive glow plug but controller relay burned: Match Hongfa HAT700BI 70A external heavy relay for current amplification
- Mismatched 24V/12V battery will not burn controller, wide voltage automatic adaptation
Compartir
