Original MEBAY DT1000 GSCloud DTU Cloud Communication Module WIFI Ethernet GPS Remote Monitor Control Genset Controller

Wide Application Range

Data center backup parallel genset cabinet, communication base station standby power, mobile trailer construction generator, marine auxiliary generator set, mine off-grid power station, commercial building ATS power distribution cabinet, municipal emergency power equipment, compatible with all ECU-controlled diesel/gas generator units.

Product Specifications

• Brand: Mebay
• Model: DT1000 GSCloud DTU Cloud Communication Module
• DC Power Supply: DC 8V ~ 36V, standby power ≤1W
• Communication Interfaces: 2.4G WIFI, RJ45 10/100Mbps Ethernet, GPS SMA antenna, RS485 Modbus RTU, USB debug
• Positioning Function: GPS real-time latitude & longitude positioning
• Installation Method: DIN rail guide rail mounting
• Overall Dimension: 106.5 × 74 × 31 mm
• Weight: 0.15kg
• Operating Temperature: -25℃ ~ +65℃
• Storage Temperature: -40℃ ~ +85℃
• Warranty: 12 months genuine factory warranty

Common Equipment Failures Solved

• Cloud platform cannot receive generator data: Check RS485 A/B wiring reverse, WIFI network password error, Ethernet cable disconnection
• GPS no positioning signal: GPS antenna installed indoors without signal, replace outdoor installation position
• APP no fault alarm push: Check alarm threshold parameter setting on controller, mobile APP message notification permission enabled
• DT1000 frequent offline: Battery insufficient power, match BCC6A charger to maintain stable battery voltage
• Laptop cannot connect DT1000 for local debugging: Use USB cable to connect computer, install official Mebay configuration software
• Multiple gensets cannot monitor together: Multiple DT1000 modules connect to each genset controller via RS485 bus, unified upload to cloud platform