Wespc Technologies
Original Mebay DT3000 MK2 Replaced By DT4000G Generator Cloud Remote Controller Control Panel
Original Mebay DT3000 MK2 Replaced By DT4000G Generator Cloud Remote Controller Control Panel
Precio habitual
$178.00 USD
Precio habitual
$220.00 USD
Precio de oferta
$178.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Original Mebay DT3000 MK2 replaced by DT4000G Generator Cloud Remote Controller Control Panel
Main Features:
1. Connect generator controller to the Internet, realizing remote real-time monitoring of the generator set by PC and App.
2. Remote controll generator
3. Remote monitor data
4. Remote fault analyze
5. Real-time locate, maintain and manage generator set.
Main Features:
1. Connect generator controller to the Internet, realizing remote real-time monitoring of the generator set by PC and App.
2. Remote controll generator
3. Remote monitor data
4. Remote fault analyze
5. Real-time locate, maintain and manage generator set.
Product Specifications
- Brand: Mebay
- Model: DT3000 MK2
- Core Function: Multi-genset parallel synchronization + mains grid peak shaving control, substitute DeepSea DT3000 MK2
- DC Power Supply: DC 8V ~ 36V, standby power ≤1.8W
- AC Sampling: 3-phase 0~600V L-L, auto 50/60Hz
- Current Measurement: CT 5A secondary, full 3-phase power parameter calculation
- Communication Interfaces: Front USB, Isolated RS485 Modbus RTU, CANbus J1939
- Relay Output Rating: 8A 250VAC volt-free programmable contacts
- Panel Cutout Size: 222 × 156 mm
- Overall Dimension: 236 × 170 × 54 mm
- Operating Temperature: -20℃ ~ +70℃
- Front Panel Protection: IP65 waterproof & dustproof with rubber sealing gasket
- Warranty: 12 months genuine factory warranty
Wide Application Range
Industrial multi-generator fixed power stations, data center backup parallel gensets, mining off-grid power supply, commercial building peak shaving standby power, marine multi-unit parallel generator systems, municipal emergency power stations, large construction site diesel generator groups, compatible with Cummins, Perkins, Volvo and other ECU-controlled diesel engines.
Common Equipment Failures Solved
- Uneven load distribution of parallel generators: PID gain parameter setting error, CT current transformer wiring reversed
- Failed to synchronize with mains grid: Mains and generator phase sequence inconsistent, voltage/frequency threshold parameter wrong
- Onboard relay burnt when driving glow plug: Onboard contact capacity limited to 8A, install external Hongfa HAT700BI 70A heavy relay for current amplification
- Laptop cannot connect controller for debugging: Use SG72A RS485 conversion adapter, check A/B wiring reversal and baud rate matching
- No engine data displayed on CAN J1939 channel: CAN-H/CAN-L wiring reversed, engine ECU communication protocol mismatch
- Frequent reverse power protection shutdown during grid parallel operation: Grid parallel phase angle threshold set too sensitive, genset governor response lag
Compartir
